Categories

False alarms and system glitches can be aggravating, and even worse, might prevent your home’s security from doing its job effectively. Fortunately, most problems, from dead batteries to false alarms, are easy to correct. Take a look at our tips for troubleshooting your home alarm system in Detroit. We’ll help keep your household shielded and your system running smoothly.

Test Your Home Security System In Detroit

One great way to troubleshoot your property’s defense is to test it! The latest systems permit you to put them in test mode to avoid initiating an emergency response. After switching to test mode, do the following:

• Activate your system as you typically would when leaving.
• Open a window or door that has a contact sensor, or try to set off something else. Shut the door or window so it doesn’t trip the alarm when you turn the system back on.
• Let the alarm go off for 60 seconds to make sure a message is delivered to the security provider and an entry is created in the alarm system log.
• Continue testing sensors as needed
• Review the systems’s activity log to validate functionality.

No need to worry, monitoring specialists will be able to see that your alarm system is being tested. Just be sure to switch off test mode when done. It’s wise to test every other month or anytime you make changes to your home’s internet or phone connectivity.

Inspect The Positioning And Condition Of Motion Sensors

Although an integral aspect of your alarm system, motion detectors are notorious for false alarms. Do your part to prevent them with a few straightforward troubleshooting steps.

• Conduct a physical check. Are there things that could move within the path of the sensor, like a curtain taken by a breeze?
• Is the sensor covered in dust? Cobwebs, dirt, and grime can result in poor performance. Make sure the sensor is clean.
• Does the motion detector offer pet immunity you can turn on? Some models can be set to ignore pets weighing as much as 100 pounds.
• When was the battery last replaced? A nearly depleted battery may affect performance or cause false alarms.
• Is a heat source impairing the sensor? Too much heat from sunlight or a fireplace can set off an alarm.

Keep Batteries Ready And Look Out For Low Battery Warnings

One helpful aspect of the latest home security systems is that they’ll alert you when batteries are running low. If your system is equipped with a control panel or app, you’ll often see notifications there. Depending on the alarm, you may hear an intermittent beep when batteries are getting low. 

Motion detectors, smoke detectors, contact sensors, and other wireless components have batteries that need to be replaced every so often. It’s wise to keep batteries on hand and create a replacement schedule. Many systems also come with a rechargeable backup battery for the primary control panel. This backup battery helps keep your system running if your power goes out and should recharge once power is back online. If it doesn’t recharge, you will need to replace it.

Troubleshooting Is Simple With ADT Home Security In Detroit 

As the top name in home security, ADT designs systems that supply unrivaled functionality and protection. Accessing test mode is simple through MyADT.com or the ADT+ app, and you’ll always be sent updates when a battery is running low. Contact Secure24 Alarm Systems, an authorized ADT dealer, to get more details and design a system perfect for your Detroit home. Place a call to (313) 306-4352 or submit our form today!